SPECIFICATIONS
| Model | RC 1030 |
RC 1530 |
| Cutting Height (field position) | 1” to 17” |
1” to 17” |
| Cutting Width (field position) |
122” |
180” |
| Overall Width (field position) | 135” |
188” |
| Overall Length (field position) | 191” |
191” |
| Side Depth (field position) | 9-1/2” |
9-1/2” |
| Overall Height (transport position) | 86” |
86” |
| Overall Width (transport/no wheels) | 87” |
90” |
| Overall Width (transport/with wheels) | 102” |
120” |
| Overall Length (transport position) | 180” |
180” |
| Ground Clearance | 16” |
16” |
| Standard Weight | 6100 lbs |
5985 lbs |
| Hitch Weight (field position) | 2125 lbs |
2100 lbs |
| Hitch Weight (transport position) | 1975 lbs |
1950 lbs |
| Common Specifications | |
| Wing Flex | 24° down, 85° up |
 |
|
| Top Deck (double frame) | 3/16” |
 |
|
| Bottom Deck (double frame) | 3/16” Impact Resistant |
| Deck Rings | 1/2” x 3”, Standard |
 |
|
| Side Skirt Thickness | Up to 7/16” thick laminated |
| Wing (skid shoes) | 3/8” x 3” AR400, Reversible |
 |
|
| Center Section (skid shoes) | 3/8” x 5-1/2” AR400 |
 |
|
| Chain Shield (standard) | Double Row 5/16” GR 30 |
| Chain Shield w/Cable (option) | 1/4” Cable |
 |
|
| Recommended/Minimum Tractor PTO | 100/80 HP |
| Tractor to Transfer Gearcase (drivelines 540/1000 PTO) |
CAT 6 with 80° CV |
| Transfer to Center/Wing Gearcase (drivelines 540/1000 PTO) |
CAT 5 |
 |
|
| Driveline Protection | Preset Friction Torque Limiters |
| Transfer Gearcase (power rating continous/peak) |
200/250 hp |
 |
|
| Center and Wing Gearcase (power rating continous/peak) | 175/200 hp |
 |
|
| Wing Lift Hydraulics (standard) | Single-acting Individual Circuits (w/routing for combined) |
 |
|
 |
|
| Brush Cutting Capacity | 4” |
| Blade Overlap | 6-1/4” |
| Center (blade tip speed 540 PTO) |
16,500 ft/minute |
| Wing (blade tip speed 540 PTO) | 16,500 ft/minute |
Center (blade tip speed 1000 PTO) |
16,750 ft/minute |
| Wing (blade tip speed 1000 PTO) | 15,950 ft/minute |
 |
|
| Blade Holder (standard) | 3/4" Blade Carrier |
 |
|
| Standard Milled Edge (blade) | 1/2” x 5” |
 |
|
| Self Leveling Hitch (standard) | 1-1/4” Precision Clamping System |
 |
|
| Self Leveling Hitch (option) | 1-1/8” Clevis Hitch |
 |
|
| Center Suspension | Walking Axle and Rubber Spring |
 |
|
| Wing Suspension (standard) | Single Wheel and Rubber Spring |
| Wing Suspension (option) | Walking Axle and Rubber Spring |
 |
|
| Laminated Wheel/Tires (standard) | 5-Bolt 21 x 5.5 |
| Foam Filled Wheel Tires (optional) | 5-Bolt 22 x 6.6 Aircraft |
| Air Filled Wheel/Tires (optional) | 5-Bolt 22 x 6.6 Aircraft |
 |
|
| Refer to Options page for more information on the following: | |
| Brush Blade (optional) | 1/2” x 4” |
| Shredder Blade Kit (optional) | 1/2” x 4” |
| Winch Kit (optional) | Available |
| Light Kit (optional) | Available |
| Tow Hitch (optional) | Available |
| Toolbox/Blade Storage (optional) | Available |
| Wing Guide Wheel (optional) | Available (RH/LH) |
 |
|
